debug serial-port

This command debugs the serial port.

Syntax

# debug serial-port 

Command	Description
configuration {show}	Displays the configuration of the second serial port: RMX (default), DSL1 or DSL2.
dsl {burn-to-flash}	Configures the second serial port to DSL.
dsl2 {burn-to-flash}	Configures the second serial port to DSL2.
rmx {burn-to-flash}	Configures the second serial port to RMX (default).

Command Mode

Privileged User

Example

This example shows how to display the second serial port's configuration:

# debug serial-port configuration show
The Yellow connector serial port is configured to the RMX